Having a swimming pool next to your house, probably in the backyard, is definitely a great thing. You don’t have to go to great lengths to get your daily dose of exercise or cool off during those hot summer afternoons. It is, however, important to recognize the fact that swimming pools require a certain level of maintenance if they are to remain relevant and usable. In addition to the usual maintenance work like cleaning and pH balancing (both of which are undertaken on a regular basis), there may come a time when it requires pool resurfacing. This could be as a result of harsh weather, wear and tear among other things.
Calling in a contractor to do this kind of work could prove quite costly especially if done from scratch. Obviously, this is not a desirable state of affairs seeing that the economy is still not where it should be. Therefore, if you are short of money you would be better off doing the pool resurfacing yourself. Of course, in order to be successful, there are a few tips you may have to take into consideration.
Determine the Extent of Resurfacing Required
You can’t just jump straight into a pool resurfacing project without first determining what exactly needs to be done. If your pool’s plaster only has a few small cracks and chips here and there, then you definitely do not have to bother yourself with a complete resurfacing project because it won’t make much sense. On the other hand if there are major issues then you need to fully familiarize yourself with them and come up with the most appropriate way forward. Basically, the whole idea here is to understand the problem that you have at hand.
Empty the Pool
Obviously a pool resurfacing protect project cannot be undertaken without emptying it. It is very important that you perform this particular task only when the conditions are right i.e. in the absence of too much ground pressure which might be caused by freezing among other things. This could cause damage to your pool.
Use the Right Materials
Not all swimming pools feature the same kind of plaster, so it is important to first and foremost determine what exactly you are dealing with before heading out to make the purchase. A good idea would be to go to the pool store with a sample so that the experts there can provide you with the correct product. Once you get what you need cover up all the cracks and chips making sure that the finish is smooth and appealing.
Depending on the product you use as well as the extent of chipping, pool resurfacing might end up being similar to painting your pool. This is because you might have to apply a number of coats in order to seal up the cracks. In this case, you will use a regular paint roller hence the resurfacing project won’t be too challenging. In addition, most of these products usually dry up pretty quickly.
After doing all the above, you may discover that you need full pool resurfacing. If you feel that you are not capable of handling such a project, then you can call in the experts at this point. However, if you want to go it alone, it is important that you don’t rush things as this will compromise the quality of your work.
